Positive-volume intersections between bodies
No standards reference is assigned to this check. The scope described above applies.
Machining · CC0-1.0
Model example
Two separate 20 mm cubes; their origins are 10 mm apart along X and 10 mm along Y. The shared 10 × 10 × 20 mm region is unintended interference; inspect body boundaries in CAD.
Dimensions (approx.): 30 × 30 × 20 mm
PRU-071: expect one warning, overlap 2000 mm³ (the generic multiple-bodies note PRU-042 stays silent: same cause).
Finding expected
No finding expected
Machining · CC0-1.0
Model example
Two separate 20 mm cubes; their origins are 20 mm apart along X and 10 mm along Y. Contact or a visible gap must not be called a volume collision.
Dimensions (approx.): 40 × 30 × 20 mm
Compare: Two cubes: 10 mm overlap
Machining · CC0-1.0
Model example
Two separate 20 mm cubes; their origins are 25 mm apart along X and 10 mm along Y. Contact or a visible gap must not be called a volume collision.
Dimensions (approx.): 45 × 30 × 20 mm
Compare: Two cubes: 10 mm overlap